Each field does have its specific features. If you want to make full use of the potential of your field, you need an individually tailored irrigation system. Determining this is an art that only true irrigation specialists can master. Just like us at BAUER. We have therefore created a special system for large, irregular surfaces: the CENTERLINER 9000. It combines the advantages of a pivot and a linear system in one machine and can even better use the area, especially when it is a spacious, irregularly shaped field. As with the LINESTAR, a central unit drives the CENTERLINER linearly with the trusses over the field. The Centerliner, however can also switch to pivot mode. A special linear control always keeps the machine on the right track. The water is supplied via hydrants and feed hose or ditch feed.
Depending on the field situation and precipitation rates, the CENTERLINER can irrigate the same area as a LINESTAR, but only requires half the number of towers. Which results in lower acquisition costs. In addition, the CENTERLINER can be pulled over to another field.
The sturdy drive tower coupling, free from play, with ball and socket perfectly compensates for extreme slopes. Mounted on the outside of the pipe, it does not restrict the cross-section of the mainline pipe, thereby ensuring optimum water flow without pressure loss. The weather, UV and ozone-resistant hose collar facilitates large angles.
BAUER is the only manufacturer to offer a control lever that is mounted directly above the swivel point of the flexible joint. Any torsion in the pipe has no influence on the control; the entire system is kept stress-free. Optimum adjustment of switching brackets with precision bearings of the control cams ensures precise movement transmission. Precise drive tower control system leads to a long product lifespan.
The precision control for all Linestar and Centerliner systems (regardless of the number of spans) and for Centerstar systems with more than 12 drive towers offers utmost accuracy. The angles between the drive towers are transmitted by means of control cables, counter-balancing any torsion in the steel structure.
The GPS-supported application SmartRain offers new possibilities in irrigation management. No matter where the user is, he is always informed about the current status of his irrigation system and can also remotely control the machine at any time.
Using GPS modules and an RTK base station, the ACTUAL position is constantly compared with the TARGET position of the machine and corrected immediately if necessary. GPS control is available as an option for Linestars and Centerliners with a 4-wheel central unit and SmartTouch control box.
Advantages of the GPS control:
Sensors track the induction field of a buried cable and thus indicate the moving direction (available for Centerliner and Linestar).
Advantages of the buried guidance wire:
The steering arm with its pulleys moves along a stretched cable, thereby determining the moving direction of the machine.
In order to control a Linestar or Centerliner, a furrow is created along the route in order to determine the moving direction of the system
Please note that our company will be closed from the 21st of December 2024 to the 1st of January 2025 due to the Christmas Holidays.
